Lenovo launched a lineup of monitors earlier this year that they dubbed as “work and play” monitors. One of those monitors was the Lenovo Q27q-10, a decent monitor with a clear display and high refresh rate. In essence, it serves a dual purpose for anyone who wishes to use it.
But, is this worth getting for your own workstation? For starters, here’s what you’re getting with the Lenovo Q27q-10:
It has a 27-inch QHD, near bezel-less display with a 75Hz refresh rate
It comes with a single metal stand with a cable management hook
Easy to set up, much easier to use
In essence, the Lenovo Q27q-10 is one easy monitor to use and set up initially. The moment I took it out of the box, I didn’t really have to look at the manual for help on setting things up. To be honest, it’s great that they made setting the monitor up easy enough so you don’t waste time.
Once you do set it on your table and connect it to your PC or console, it’s already good to go. I say this because with some monitors, you still need to do some level of display calibration the moment you turn it on. Sometimes, you even need to calibrate the color settings to remove unnecessary yellows in the display.
Except for adjusting the monitor’s refresh rate, this monitor is quite easy to get around the moment you connect it. Speaking of that refresh rate…
Best for work and casual play, as advertised
The Lenovo Q27q-10 comes with a 27-inch QHD display, which is a large enough display on its own. I managed to write this article down while watching high-quality YouTube videos on the side. Also, since it doesn’t require that much calibration, I was already expecting great color accuracy when watching videos or editing photos.
Now, it’s not an anti-glare display so I wouldn’t recommend using this near your windows. It’s relatively bright even at 70 percent brightness, so you don’t really have to crank it up and risk getting blinded. However, the one time I used this monitor near my window, I could barely see what I was working on at 70%.
One other feature this monitor comes with is the 75Hz refresh rate, with a 4ms response rate. By competitive gaming standards, this really isn’t much even if it comes with AMD FreeSync compatibility. However, for casual players, you will find great value in it.
Good port selection and cable management, not suited for next-gen
At the back of the display, the Lenovo Q27q-10 comes with an HDMI 1.4 port and a DisplayPort 1.2. Both these ports are equally great, and I honestly believe this is a standard for most work displays moving forward. Also, it comes with internal speakers for audio output when connected to the HDMI port.
As I pointed out earlier, the monitor also comes with a cable management hook at the bottom of the stand. It’s a bit sharp for my liking, but it has enough space to run a lot of wires through it. Throughout my entire use of it, I manage to run power wires, keyboard and mouse wires through it — with so much room to spare.
However, I’m telling you now that this monitor isn’t necessarily suitable for your PlayStation 5 or Xbox Series X. Apart from the low refresh rate, the HDMI 1.4 port simply won’t cut it for that 120 FPS everyone craves for on the next-gen consoles. Another minor detail here is that currently, the PS5 still doesn’t support 1440p displays so expect a resolution drop.
With a good set of ports and nifty features, it serves its dual purpose quite well. Although, if you plan to do some competitive or next-gen gaming, this doesn’t offer you enough features for them.
Overall, this is a great pickup for your WFH or casual gaming setup. At a decent price, it isn’t taxing on your wallet and it’s easy to set up, as well.